A
lightweight professional grade aluminum pole saw. A pole saw
with an oval shaped cross-section. Aluminum in construction,
this saw can perform the heaviest of work. The ZUBAT pole
saw has the same curved blade as ZUBAT hand saw. The base
pole has a comfortable sponge rubber grip. The pole has a
lever lock with spring loaded buttons at the end of each
length. The oval aluminum alloy extension pole gives precise
control to the direction of the saw blade (especially
important for high cutting) and strength and rigidity to the
pole, reducing bending to the minimum. Push buttons allow
multiple length adjustments and safety clamps hold the
extensions firmly in place. Very lightweight and easy to
maneuver.
Product Features
1-Extension (2 poles) model that extends to 13 feet
Extension
range 7’-9" to 12’-7" (2,350 to 3,850mm)
Maximum
working reach 18 feet
330mm
(13 inch) length chrome plated blade with 7.5 teeth per
30mm (6.35 teeth per inch)
Approximate weight 2,150g (4.7lb)
A
lightweight and rigid aluminum oval shaped pole
Double
lock system insures your safety while working
Comes
with its own full length, hard plastic scabbard
Limited
lifetime warranty against defects in material and
workmanship
Product Specification
Product
Code No.
Blade Length, mm/inches
Teeth per 30mm/inch
Weight,
g/lb
ZUBAT 330 LARGE TEETH 13 FEET
SAW
272-18
330 / 13
7.5 / 6.35
2,150 / 4.7
BLADE
271-33
Product
Applications
Forestry
Arborist
Pruning
Lawn & Garden
Product Technology
Non-set Teeth - Blades
are made from SK-4 high carbon steel and taper ground i.e.
thicker at the tooth edge, thinner at the back of the blade.
This taper reduces resistance giving smoother, easier,
faster cutting performance.
Mirai-Me Smooth Cutting
- The teeth of the future! Blades have precision ground,
razor sharp teeth with 4 cutting angles along their length.
They leave an especially smooth surface after cutting and
are ideal for pruning, greatly reducing the risk of
infection. They can rip-cut, cross-cut and slant-cut.
Impulse Hardening - Using a
special high frequency heating technique, teeth are heated
instantly and hardened. Because of this localized heating
process only the teeth of the blade are heated and hardened.
The remainder of the blade is unchanged and still retains
its normal flexibility. The hardened teeth are harder than
an ordinary file and stay sharp about three times longer
than non-hardened teeth.
Hard Chrome Plating -
Hard chrome plating produces an exceedingly hard, durable
surface. The blades are resistant to rust and the effects of
resin. They are finely or mirror polished and wipe clean
easily.
Rubber Handle - Almost
all Silky saws have rubber compound elastomer handles either
inserted or vulcanized to ABS plastic or steel are
comfortable to hold, reduce vibration and offer superior
grip when hands are wet or cold and when wearing gloves.
FPA-ANERKANNT FPA
- approved in Germany.
THE GOOD DESIGN AWARD G-Mark - Award by
Japan Industrial Design Promotion Organization.
