HIBIKI 210 FT

STRAIGHT SAWS

Straight Saw HIBIKI 210 Fine Teeth - RYOBA

New Silky HIBIKI 210 RYOBA saw for Rip-cut and Cross-cut. Ultimate quality coupled with terrific features. Taper-ground chrome-plated blade allows a fluid, straight cut as teeth are actually wider than mirror polished blade. Comes with a grey plastic case for storage and carrying on the belt.

Rip-cut

Cross-cut

Product Features

	22 teeth per 30mm (19 teeth per inch)
	210mm (8.3 inch) length blade
	Overall Length 490mm (19.3 inch)
	Weight 350g (0.77lb)
	Kerf 0.95mm (0.037 inch)
	Mirai-Me blade - the blade has 4 cutting angles along its length. It leaves silky smooth surface after cutting and can rip-cut, cross-cut and slant-cut
	The blade is taper-ground to reduce resistance giving smoother, easier, faster cutting performance
	Hard chrome plating produces an exceedingly high durable surface, and is resistant to rust and the effects of resin
	The teeth of the blades are heated instantly and hardened, and stay sharp about three times longer than non-hardened teeth
	The rubber handle is comfortable to hold, reduce vibration and offers superior grip when hands are wet or cold when wearing gloves
	Easy blade change mechanism - simply remove the screw to replace the blade
	Exacting, Fine, Precise, Smooth cuts are achieved without blade vibration
	Limited lifetime warranty against defects in material and workmanship

Product Specification

Product	Code No.	Blade Length, mm/inches	Teeth per 30mm/inch	Weight, g/lb
HIBIKI 210 FINE TEETH
SAW	396-21	210 / 8.3	22 / 19	350 / 0.77
BLADE	397-21	210 / 8.3	22 / 19	70 / 0.15

Product Applications
	Cabinet Maker	Woodworking
	DIY & Hobby
Product Technology
	Non-set Teeth - Blades are made from SK-4 high carbon steel and taper ground i.e. thicker at the tooth edge, thinner at the back of the blade. This taper reduces resistance giving smoother, easier, faster cutting performance.
	Impulse Hardening - Using a special high frequency heating technique, teeth are heated instantly and hardened. Because of this localized heating process only the teeth of the blade are heated and hardened. The remainder of the blade is unchanged and still retains its normal flexibility. The hardened teeth are harder than an ordinary file and stay sharp about three times longer than non-hardened teeth.
	Hard Chrome Plating - Hard chrome plating produces an exceedingly hard, durable surface. The blades are resistant to rust and the effects of resin. They are finely or mirror polished and wipe clean easily.
	Rubber Handle - Almost all Silky saws have rubber compound elastomer handles either inserted or vulcanized to ABS plastic or steel are comfortable to hold, reduce vibration and offer superior grip when hands are wet or cold and when wearing gloves.
	Mirai-Me Smooth Cutting - The teeth of the future! Blades have precision ground, razor sharp teeth with 4 cutting angles along their length. They leave an especially smooth surface after cutting and are ideal for pruning, greatly reducing the risk of infection. They can rip-cut, cross-cut and slant-cut.