Frequently Asked Questions

This page contains answers to common questions about Silky Saws, along with some tips and tricks that you have found useful and presented here as questions.

Can these blades be sharpened?

The short answer is no. Here is the explanation. The blades are made of very high quality Japanese steel and are heat tempered on the cutting edges for long lasting service. They were not designed to be sharpened but instead to keep the edge sharper much longer than traditional blades.

Where can I buy Silky Saws?

Silky products can be purchased at any of the dealers listed on the Dealer Locator page of this site.

Do Silky Saws cut only on the pull stroke?

Y

es, they cut only on the pull stroke and they need a very little pressure to cut efficiently. The kerf of the blade is such that it bites into the wood as it's pulled across without extra pressure from the user. Remember, extra pressure and wrenching the saw will break your blades!

How should I clean the blade when it's covered in resin?

After use the blades do collect tree sap and the easiest way our customers have found to clean them is to spray the blades with Easy-Off, oven cleaner. Leave on for 10 minutes, brush with a toothbrush, wash, dry and spray with WD-40. Or just use soap and water or mild cleaner, do not use solvent.

Are replacement parts available?

Yes, we have replacement blades for all saws plus other assorted hardware like attachment bolts, push buttons, friction locks, and replacement sections for the pole saws.